AIR-AP690IX(ODU)

Stronger Signals. Wider Coverage. Faster Connections.

  • High-level outdoor 802.1ax wireless access
  • Fiber uplink for long-distance connection
  • Operating in a wide temperature range
  • Highest IP68 Anti-dust & water standard
  • Good PoE compatibility
Download Sheet

Product Overview

AirPro AIR-AP690IX(ODU) is high performance outdoor wireless access point which can support 2.4 GHz and 5 GHz band, adopting technologies such as Multi-User Multiple-Input Multiple-Output (MU-MIMO) and orthogonal frequency division multiplexing (OFDM), providing a data transmission rate of at most 575 Mbps in 2.4GHz band and 1200Mbps in 5GHz band. It supports up to 254 concurrent users. With integrated antenna inside, AIR-AP690IX(ODU)  is widely used at outdoor WIFI coverage networks, such as campus, streets, rural area, resorts and scenic spots.

Key Features

High-level outdoor 802.1ax wireless access

The AP690IX(ODU) supports the 802.11ax standard and can operate in 2.4 GHz and 5 GHz both bands. It provides an access bandwidth up to 1.775Gbps, which can connect users up to 254 simultaneously.

Fiber uplink for long-distance connection

Fiber port used as uplink ports, which break through the limitations of the conventional copper port, the distance is no longer a bottleneck.

Operating in a wide temperature range

Thanks to deliberate hardware design and the selection of dedicated components it can operate in a broad temperature range from -40°C to 65°C.

Highest IP68 Anti-dust & water standard

AP690IX(ODU) comply IP68 can be deployed in the harshest outdoor environment.

Good PoE compatibility

AP690IX(ODU) can work well with the third-part PoE switches that support 802.3at standard.

High-performance RF

The professional optimized design is employed for the RF module of the AP690IX(ODU) integrated directional antenna supports 27 dB transmission power which can greatly improve wireless coverage.

Cloud management

AP690IX(ODU) can operate with the AirPro cloud platform seamless to provide a better cost-performance solution;

Dual-mode fit & fat

AP690IX(ODU) can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.

Hardware Specifications

Dimensions (L*W*D) (mm) 245 × 200 × 90
Working Frequency 2.4G:802.11b/g/n/ax
5G:802.11a/n/ac/ax
Maximum Data Rate 2.4G:575Mbps
5G:1200Mbps
Physical Port 1 * 10/100/1000Base-T PoE port for uplink
1 * 1000M SFP fiber port
PoE 802.3at
Maximum power consumption < 23.4W
Antenna Internal antenna, 2.4G 10dBi, 5G 10dBi
Working frequency band 802.11a/n/ac: 5.150 GHz to 5.850 GHz
802.11b/g/n/ax: 2.4 GHz to 2.483 GHz
802.11a/n/ac/ax:
5.150~5.350GHz
5.47~5.725GHz
5.725~5.850GHz
Modulation technology 11b:DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g:OFDM:64QAM@48/54Mbps,16QAM@24Mbps,
QPSK@12/18Mbps, BPSK@6/9Mbps
11n:MIMO-OFDM: BPSK, QPSK,16QAM,64QAM
11ac:MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM
11ax: MIMO-OFDMA: BPSK, QPSK,16QAM,64QAM,256QAM,1024QAM
Transmit power 2.4G: 27dBm
5G : 27dBm
(Note:final output power comply with deployment regulation might be different)
Power adjustment granularity 1 dBm
Working/Storage temperature -40°C to +65°C
–45°C to +80°C
Working/Storage RH 5% to 95% (non-condensing)
Protection level IP68

Software Specifications

WLAN Product positioning Outdoor dual frequency
Working frequency band 2.4 GHz and 5 GHz
Bandwidth performance 1775Mbps
Virtual AP (BSSID) 32
Concurrent user 254
Number of spatial streams 2.4G: 2    5G:2
Dynamic channel adjustment (DCA) Yes
Transmit power control (TPC) Yes
Blind area detection and repair Yes
SSID hiding Yes
RTS/CTS Yes
RF environment scanning Yes
Hybrid access Yes
Restriction on the number of access users Yes
Link integrity check Yes
Accessing control of terminals based on  signal strength Yes
Forcing terminals to roam based on signal strength Yes
Intelligent control of terminals based on airtime fairness Yes
High-density application optimization Yes
802.11ax Space streams 2.4GHz:2, 5GHz:2
Frequency band 2.4GHz + 5GHz
80 MHz bundling Yes
1200Mbps(PHY) Yes
Frame aggregation (A-MPDU) Yes
Frame aggregation (A-MSDU) Yes
Maximum likelihood demodulation (MLD) Yes
Transmit beamforming (TxBF) Yes
Maximum ratio combining (MRC) Yes
Space-time block coding (STBC) Yes
Low-density parity-check code (LDPC) Yes
Security Encryption 64/128 WEP, TKIP, and CCMP encryption
802.11i Yes
Portal authentication Yes
WAPI Yes
MAC address authentication Yes
LDAP authentication Yes
PEAP authentication Yes
WIDS/WIPS Yes
Protection against DoS attacks Anti-DoS for wireless management packets
Forwarding security Frame filtering, white list, static blacklist, and dynamic blacklist
User isolation AP L2 forwarding suppression
Isolation between client
Periodic SSID enabling and disabling Yes
Access control of free resources Yes
Wireless SAVI Yes
ACL Access control of various data packets such as MAC, IPv4, and IPv6 packets
Secure access control of APs Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC
802.11W Yes, encryption of management frames
Forwarding IP address setting Static IP address configuration or dynamic DHCP address allocation
IPv6 forwarding Yes
IPv6 portal Yes
Local forwarding Yes
Multicast IGMP snooping
Roaming Yes
AP switching reference Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc.
WDS Yes
QoS WMM Yes
Priority mapping Ethernet port 802.1P identification and marking

Mapping from wireless priorities to wired priorities

QoS policy mapping Mapping of different SSIDs/VLANs to different QoS policies

Mapping of data streams that match with different packet fields to different QoS policies

L2-L4 packet filtering and
flow classification
Yes: MAC, IPv4, and IPv6 packets
Load balancing Load balancing based on the number of users

Load balancing based on user traffic

Load balancing based on frequency bands

Bandwidth limit Bandwidth limit based on APs

Bandwidth limit based on SSIDs

Bandwidth limit based on terminals

Bandwidth limit based on specific data streams

Call admission control (CAC) CAC based on the number of users
Power saving mode Yes
Automatic emergency mechanism of APs Yes
Intelligent identification of terminals Yes
Multicast enhancement Multicast to unicast
Management Network management Centralized management through an AC; both fit and fat modes
Maintenance mode Both local and remote maintenance
Log function Local logs, Syslog, and log file export
Alarm Yes
Fault detection Yes
Statistics Yes
Switching between the fat and fit modes An AP working in fit mode can switch to the fat mode through a wireless AC;

An AP working in fat mode can switch to the fit mode through a local control port or Telnet.

Remote probe analysis Yes
Watchdog Yes
Value added service Value added marketing Support: various apps based on intelligent terminals, advertising push based on location, personalized push of portals
Value added authentication WeChat, SMS, QR code
Passenger flow analysis yes

CTA Heading

CTA Descirption